(****************** Turbo Pascal for Windows Declarations ******************)
unit tpwgpib;
{Letzte Modifikation H. Haftmann 08.12.97 (Interface-Teil ist kompatibel)}
interface
uses
WinTypes;
(***************************************************************************)
(* Define various constant values *)
Const
(* GPIB Commands: *)
UNL = $3f; (* GPIB unlisten command *)
UNT = $5f; (* GPIB untalk command *)
GTL = $01; (* GPIB go to local *)
SDC = $04; (* GPIB selected device clear *)
PPC = $05; (* GPIB parallel poll configure *)
GET = $08; (* GPIB group execute trigger *)
TCT = $09; (* GPIB take control *)
LLO = $11; (* GPIB local lock out *)
DCL = $14; (* GPIB device clear *)
PPU = $15; (* GPIB parallel poll unconfigure *)
SPE = $18; (* GPIB serial poll enable *)
SPD = $19; (* GPIB serial poll disable *)
PPE = $60; (* GPIB parallel poll enable *)
PPD = $70; (* GPIB parallel poll disable *)
(* GPIB status bit vector: *)
ERR = -$8000; (* Error detected *)
TIMO = $4000; (* Timeout *)
EEND = $2000; (* EOI or EOS detected *)
SRQI = $1000; (* SRQ detected by CIC *)
RQS = $800; (* Device needs service *)
SPOLL = $400; (* Board has been serially polled *)
EVENT = $200; (* An event has occured *)
CMPL = $100; (* I/O completed *)
LOK = $80; (* Local lockout state *)
REM = $40; (* Remote state *)
CIC = $20; (* Controller-in-Charge *)
ATN = $10; (* Attention asserted *)
TACS = $8; (* Talker active *)
LACS = $4; (* Listener active *)
DTAS = $2; (* Device trigger state *)
DCAS = $1; (* Device clear state *)
(* Error messages returned in global variable IBERR: *)
EDVR = 0; (* system error *)
ECIC = 1; (* Function requires GPIB board to be CIC *)
ENOL = 2; (* Write function detected no Listeners *)
EADR = 3; (* Interface board not addressed correctly *)
EARG = 4; (* Invalid argument to function call *)
ESAC = 5; (* Function requires GPIB board to be SAC *)
EABO = 6; (* I/O operation aborted *)
ENEB = 7; (* Non-existent interface board *)
EDMA = 8;
EOIP = 10; (* I/O operation started before previous *)
(* operation completed *)
ECAP = 11; (* No capability for intended operation *)
EFSO = 12; (* File system operation error *)
EBUS = 14; (* Command error during device call *)
ESTB = 15; (* Serial poll status byte lost *)
ESRQ = 16; (* SRQ remains asserted *)
ETAB = 20; (* The return buffer is full *)
ELCK = 21;
(* EOS mode bits: *)
BIN = $1000; (* Eight bit compare *)
XEOS = $800; (* Send EOI with EOS byte *)
REOS = $400; (* Terminate read on EOS *)
(* Timeout values and meanings: *)
TNONE = 0; (* Infinite timeout (disabled) *)
T10us = 1; (* Timeout of 10 us (ideal) *)
T30us = 2; (* Timeout of 30 us (ideal) *)
T100us = 3; (* Timeout of 100 us (ideal) *)
T300us = 4; (* Timeout of 300 us (ideal) *)
T1ms = 5; (* Timeout of 1 ms (ideal) *)
T3ms = 6; (* Timeout of 3 ms (ideal) *)
T10ms = 7; (* Timeout of 10 ms (ideal) *)
T30ms = 8; (* Timeout of 30 ms (ideal) *)
T100ms = 9; (* Timeout of 100 ms (ideal) *)
T300ms = 10; (* Timeout of 300 ms (ideal) *)
T1s = 11; (* Timeout of 1 s (ideal) *)
T3s = 12; (* Timeout of 3 s (ideal) *)
T10s = 13; (* Timeout of 10 s (ideal) *)
T30s = 14; (* Timeout of 30 s (ideal) *)
T100s = 15; (* Timeout of 100 s (ideal) *)
T300s = 16; (* Timeout of 300 s (ideal) *)
T1000s = 17; (* Timeout of 1000 s (maximum) *)
(* Miscellaneous: *)
S = $08; (* Parallel poll sense bit *)
LF = $0A; (* ASCII linefeed character *)
NO_SAD = 0; (* test only the pad *)
ALL_SAD = -1; (* test all secondary addresses of pad *)
(* IBEVENT Constants *)
EventDTAS = 1;
EventDCAS = 2;
(* Values for the 488.2 Send command *)
NULLend = 00; (* do nothing at the end of a transfer *)
NLend = 01; (* send NL with EOI after a transfer *)
DABend = 02; (* send EOI with the last DAB *)
(* This value is used by the 488.2 Receive command. *)
STOPend = $0100; (* stop the read on EOI *)
(* This value is used to terminate a 488.2 address list. It should be *)
(* assigned to the pad field of the last entry. *)
NOADDR = -1;
(* The following constants are used for the second parameter of the *)
(* ibconfig function. They are the "option" selection codes. *)
IbcPAD= $0001; (* Primary Address *)
IbcSAD= $0002; (* Secondary Address *)
IbcTMO= $0003; (* Timeout Value *)
IbcEOT= $0004; (* Send EOI with last data byte? *)
IbcPPC= $0005; (* Parallel Poll Configure *)
IbcREADDR= $0006; (* Repeat Addressing *)
IbcAUTOPOLL= $0007; (* Disable Auto Serial Polling *)
IbcCICPROT= $0008; (* Use the CIC Protocol? *)
IbcIRQ= $0009; (* Use PIO for I/O *)
IbcSC= $000A; (* Board is System Controller. *)
IbcSRE= $000B; (* Assert SRE on device calls? *)
IbcEOSrd= $000C; (* Terminate reads on EOS. *)
IbcEOSwrt= $000D; (* Send EOI with EOS character. *)
IbcEOScmp= $000E; (* Use 7 or 8-bit EOS compare. *)
IbcEOSchar= $000F; (* The EOS character. *)
IbcPP2= $0010; (* Use Parallel Poll Mode 2. *)
IbcTIMING= $0011; (* NORMAL, HIGH, or VERY_HIGH timing. *)
IbcDMA= $0012; (* Use DMA for I/O. *)
IbcReadAdjust= $0013; (* Swap bytes during an ibrd. *)
IbcWriteAdjust= $0014; (* Swap bytes during an ibwrt. *)
IbcEventQueue= $0015; (* Enable/disable the event queue. *)
IbcSPollBit= $0016; (* Enable/disable the visibility of SPOLL. *)
IbcSendLLO= $0017; (* Enable/disable the sending of LLO. *)
IbcSPollTime= $0018; (* Set the timeout value for serial polls. *)
IbcPPollTime= $0019; (* Set the parallel poll length period. *)
IbcNoEndBitOnEOS= $001A; (* Remove EOS from END bit of IBSTA. *)
IbcUnAddr= $001B; (* Enable/disable device unaddressing. *)
(* Constants that can be used (in addition to the ibconfig constants) *)
(* when calling the ibask() function. *)
IbaPAD= $0001; (* Primary Address *)
IbaSAD= $0002; (* Secondary Address *)
IbaTMO= $0003; (* Timeout Value *)
IbaEOT= $0004; (* Send EOI with last data byte? *)
IbaPPC= $0005; (* Parallel Poll Configure *)
IbaREADDR= $0006; (* Repeat Addressing *)
IbaAUTOPOLL= $0007; (* Disable Auto Serial Polling *)
IbaCICPROT= $0008; (* Use the CIC Protocol? *)
IbaIRQ= $0009; (* Use PIO for I/O *)
IbaSC= $000A; (* Board is System Controller. *)
IbaSRE= $000B; (* Assert SRE on device calls? *)
IbaEOSrd= $000C; (* Terminate reads on EOS. *)
IbaEOSwrt= $000D; (* Send EOI with EOS character. *)
IbaEOScmp= $000E; (* Use 7 or 8-bit EOS compare. *)
IbaEOSchar= $000F; (* The EOS character. *)
IbaPP2= $0010; (* Use Parallel Poll Mode 2. *)
IbaTIMING= $0011; (* NORMAL, HIGH, or VERY_HIGH timing. *)
IbaDMA= $0012; (* Use DMA for I/O. *)
IbaReadAdjust= $0013; (* Swap bytes during an ibrd. *)
IbaWriteAdjust= $0014; (* Swap bytes during an ibwrt. *)
IbaEventQueue= $0015; (* Enable/disable the event queue. *)
IbaSPollBit= $0016; (* Enable/disable the visibility of SPOLL. *)
IbaSendLLO= $0017; (* Enable/disable the sending of LLO. *)
IbaSPollTime= $0018; (* Set the timeout value for serial polls. *)
IbaPPollTime= $0019; (* Set the parallel poll length period. *)
IbaNoEndBitOnEOS= $001A; (* Remove EOS from END bit of IBSTA. *)
IbaUnAddr= $001B; (* Enable/disable device unaddressing. *)
IbaBNA= $0200; (* A device's access board. *)
IbaBaseAddr= $0201; (* A GPIB board's base I/O address. *)
IbaDmaChannel= $0202; (* A GPIB board's DMA channel. *)
IbaIrqLevel= $0203; (* A GPIB board's IRQ level. *)
IbaBaud= $0204; (* Baud rate used to communicate to CT box. *)
IbaParity= $0205; (* Parity setting for CT box. *)
IbaStopBits= $0206; (* Stop bits used for communicating to CT. *)
IbaDataBits= $0207; (* Data bits used for communicating to CT. *)
IbaComPort= $0208; (* System COM port used for CT box. *)
IbaComIrqLevel= $0209; (* System COM port's interrupt level. *)
IbaComPortBase= $020A; (* System COM port's base I/O address. *)
(* The following values are used by the iblines function. The unsigned *)
(* integer returned by iblines contains: *)
(* The lower byte will contain a "monitor" bit mask. If a bit is *)
(* set (1) in this mask, then the corresponding line can be *)
(* monitiored by the driver. If the bit is clear (0), *)
(* then the line cannot be monitored. *)
(* The upper byte will contain the status of the bus lines. *)
(* Each bit corresponds to a certain bus line, and has *)
(* a correcponding "monitor" bit in the lower byte. *)
(*
ValidEOI= $0080;
ValidATN= $0040;
ValidSRQ= $0020;
ValidREN= $0010;
ValidIFC= $0008;
ValidNRFD= $0004;
ValidNDAC= $0002;
ValidDAV= $0001;
BusEOI= $8000;
BusATN= $4000;
BusSRQ= $2000;
BusREN= $1000;
BusIFC= $0800;
BusNRFD= $0400;
BusNDAC= $0200;
BusDAV= $0100;
(****************************************************************************)
Type Addrlist = array [0..255] of integer;
cbuf = array [1..255] of char;
const
ibsta: Integer=0; (* status word *)
iberr: Integer=0; (* GPIB error code *)
ibcntl: LongInt=0; (* number of bytes sent or DOS error *)
var
ibcnt: Integer absolute ibcntl;{# 16bit variant }
rval: Integer; {# return value of 488.1 functions }
(***************************************************************************)
(* Explicitly import the GPIB.DLL direct-entry functions ... *)
function DLLibclr (ud: integer; var ibsta,iberr: integer;
var ibcntl: longint): integer;
function DLLibloc (ud: integer; var ibsta,iberr: integer;
var ibcntl: longint): integer;
function DLLibpct (ud: integer; var ibsta,iberr: integer;
var ibcntl: longint): integer;
function DLLibsic (ud: integer; var ibsta,iberr: integer;
var ibcntl: longint): integer;
function DLLibstop (ud: integer; var ibsta,iberr: integer;
var ibcntl: longint): integer;
function DLLibtrg (ud: integer; var ibsta,iberr: integer;
var ibcntl: longint): integer;
function DLLibcac (ud: integer; v: integer; var ibsta,iberr: integer;
var ibcntl: longint): integer;
function DLLibdma (ud: integer; v: integer; var ibsta,iberr: integer;
var ibcntl: longint): integer;
function DLLibeos (ud: integer; v: integer; var ibsta,iberr: integer;
var ibcntl: longint): integer;
function DLLibeot (ud: integer; v: integer; var ibsta,iberr: integer;
var ibcntl: longint): integer;
function DLLibgts (ud: integer; v: integer; var ibsta,iberr: integer;
var ibcntl: longint): integer;
function DLLibist (ud: integer; v: integer; var ibsta,iberr: integer;
var ibcntl: longint): integer;
function DLLibonl (ud: integer; v: integer; var ibsta,iberr: integer;
var ibcntl: longint): integer;
function DLLibpad (ud: integer; v: integer; var ibsta,iberr: integer;
var ibcntl: longint): integer;
function DLLibppc (ud: integer; v: integer; var ibsta,iberr: integer;
var ibcntl: longint): integer;
function DLLibrsc (ud: integer; v: integer; var ibsta,iberr: integer;
var ibcntl: longint) : integer;
function DLLibrsv (ud: integer; v: integer; var ibsta,iberr: integer;
var ibcntl: longint) : integer;
function DLLibsad (ud: integer; v: integer; var ibsta,iberr: integer;
var ibcntl: longint) : integer;
function DLLibsre (ud: integer; v: integer; var ibsta,iberr: integer;
var ibcntl: longint) : integer;
function DLLibtmo (ud: integer; v: integer; var ibsta,iberr: integer;
var ibcntl: longint) : integer;
function DLLibwait (ud: integer; mask: word; var ibsta,iberr: Integer;
var ibcntl: longint) : integer;
function DLLibask (ud: integer; option: integer; var retval: integer;
var ibsta,iberr: Integer;
var ibcntl: longint) : integer;
function DLLibbna (ud: integer; udname: PChar; var ibsta,iberr: Integer;
var ibcntl: longint) : integer;
function DLLibcmd (ud: integer; var buf; cnt: longint;
var ibsta,iberr: Integer;
var ibcntl: longint) : integer;
function DLLibcmda (ud: integer; var buf; cnt: longint;
var ibsta,iberr: Integer;
var ibcntl: longint) : integer;
function DLLibdiag (ud: integer; var buf; cnt: longint;
var ibsta,iberr: Integer;
var ibcntl: longint) : integer;
function DLLibevent (ud: integer; var event: integer;
var ibsta,iberr: Integer;
var ibcntl: longint) : integer;
function DLLiblines (ud: integer; var result: integer;
var ibsta,iberr: Integer;
var ibcntl: longint) : integer;
function DLLibrd (ud: integer; var buf; cnt: longint;
var ibsta,iberr: Integer;
var ibcntl: longint) : integer;
function DLLibrda (ud: integer; var buf; cnt: longint;
var ibsta,iberr: Integer;
var ibcntl: longint) : integer;
function DLLibrdf (ud: integer; filename: PChar;
var ibsta,iberr: Integer;
var ibcntl: longint) : integer;
function DLLibrdkey (ud: integer; var buf; cnt: integer;
var ibsta,iberr: Integer;
var ibcntl: longint) : integer;
function DLLibrpp (ud: integer; var ppr : integer;
var ibsta,iberr: Integer;
var ibcntl: longint) : integer;
function DLLibrsp (ud: integer; var spr : integer;
var ibsta,iberr: Integer;
var ibcntl: longint) : integer;
function DLLibwrt (ud: integer; const buf; cnt: longint;
var ibsta,iberr: Integer;
var ibcntl: longint) : integer;
function DLLibwrta (ud: integer; const buf; cnt: longint;
var ibsta,iberr: Integer;
var ibcntl: longint) : integer;
function DLLibwrtf (ud: integer; filename : PChar;
var ibsta,iberr: Integer;
var ibcntl: longint) : integer;
function DLLibwrtkey (ud: integer; const buf; cnt: integer;
var ibsta,iberr: Integer;
var ibcntl: longint) : integer;
function DLLibfind (udname : PChar;
var ibsta,iberr: Integer;
var ibcntl: longint) : integer;
function DLLibconfig (bdid: integer; option: integer; v: integer;
var ibsta,iberr: Integer;
var ibcntl: longint) : integer;
function DLLibpoke (ud: integer; option: integer; v: integer;
var ibsta,iberr: Integer;
var ibcntl: longint) : integer;
function DLLibdev (ud: integer; pad: integer; sad: integer; tmo: integer;
eot: integer; eos: integer;
var ibsta,iberr: Integer;
var ibcntl: longint) : integer;
function DLLibln (ud: integer; pad: integer; sad: integer;
var listen: integer;
var ibsta,iberr: Integer;
var ibcntl: longint) : integer;
procedure DLLSendCmds(boardID: integer; const buf; cnt: longint;
var ibsta,iberr: Integer;
var ibcntl: longint);
procedure DLLSendSetup(boardID: integer; listen: Addrlist;
var ibsta,iberr: Integer;
var ibcntl: longint);
procedure DLLSendDataBytes(boardID: integer;
const buffer; cnt: longint; eot_mode: Word;
var ibsta,iberr: Integer;
var ibcntl: longint);
procedure DLLSend(boardID: integer; listener: integer;
const databuf; datacnt: longint; eotMode: Word;
var ibsta,iberr: Integer;
var ibcntl: longint);
procedure DLLSendList(boardID: integer; var listeners: Addrlist;
const databuf; datacnt: longint; eotMode: integer;
var ibsta,iberr: Integer;
var ibcntl: longint);
procedure DLLReceiveSetup(boardID: integer; talker: integer;
var ibsta,iberr: Integer;
var ibcntl: longint);
procedure DLLRcvRespMsg(boardID: integer;
var buffer; cnt: longint; eotMode: integer;
var ibsta,iberr: Integer;
var ibcntl: longint);
procedure DLLReceive(boardID: integer; talker: integer;
var buf; cnt: longint; eotMode: integer;
var ibsta,iberr: Integer;
var ibcntl: longint);
procedure DLLSendIFC(boardID: integer; var ibsta,iberr: Integer;
var ibcntl: longint);
procedure DLLDevClear(boardID: integer; address: integer;
var ibsta,iberr: Integer;
var ibcntl: longint);
procedure DLLDevClearList(boardID: integer; var addrlist: Addrlist;
var ibsta,iberr: Integer;
var ibcntl: longint);
procedure DLLEnableLocal(boardID: integer; var laddrs: Addrlist;
var ibsta,iberr: Integer;
var ibcntl: longint);
procedure DLLEnableRemote(boardID: integer; var laddrs: Addrlist;
var ibsta,iberr: Integer;
var ibcntl: longint);
procedure DLLSetRWLS(boardID: integer; var laddrs: Addrlist;
var ibsta,iberr: Integer;
var ibcntl: longint);
procedure DLLSendLLO(boardID: integer;
var ibsta,iberr: Integer;
var ibcntl: longint);
procedure DLLPassControl(boardID: integer; talker: integer;
var ibsta,iberr: Integer;
var ibcntl: longint);
procedure DLLReadStatusByte(boardID: integer; talker: integer;
var result: integer;
var ibsta,iberr: Integer;
var ibcntl: longint);
procedure DLLTrigger(boardID: integer; laddrs: integer;
var ibsta,iberr: Integer;
var ibcntl: longint);
procedure DLLTriggerList(boardID: integer; var laddrs: Addrlist;
var ibsta,iberr: Integer;
var ibcntl: longint);
procedure DLLPPollConfig(boardID: integer; laddr: Word; dataLine: Word;
lineSense: Word;
var ibsta,iberr: Integer;
var ibcntl: longint);
procedure DLLPPollUnconfig(boardID: integer; var laddrs: Addrlist;
var ibsta,iberr: Integer;
var ibcntl: longint);
procedure DLLPPoll(boardID: integer; var res_ptr: integer;
var ibsta,iberr: Integer;
var ibcntl: longint);
procedure DLLTestSRQ(boardID: integer; var result: integer;
var ibsta,iberr: Integer;
var ibcntl: longint);
procedure DLLWaitSRQ(boardID: integer; var result: integer;
var ibsta,iberr: Integer;
var ibcntl: longint);
procedure DLLResetSys(boardID: integer; var laddrs: Addrlist;
var ibsta,iberr: Integer;
var ibcntl: longint);
procedure DLLFindRQS(boardID: integer; var taddrs: Addrlist;
var dev_stat: integer;
var ibsta,iberr: Integer;
var ibcntl: longint);
procedure DLLAllSpoll(boardID: integer; var taddrs: Addrlist; res: Addrlist;
var ibsta,iberr: Integer;
var ibcntl: longint);
procedure DLLFindLstn(boardID: integer; var pads: Addrlist;
var results: Addrlist; limit: integer;
var ibsta,iberr: Integer;
var ibcntl: longint);
procedure DLLTestSys(boardID: integer; var addrs: Addrlist;
var result: Addrlist;
var ibsta,iberr: Integer;
var ibcntl: longint);
(***************************************************************************)
(* The GPIB board functions declared public by the TPW_GPIB unit: *)
(***************************************************************************)
procedure ibask (bd:integer; option:integer; var retval : integer);
procedure ibbna (bd:integer; bname: PChar);
procedure ibcac (bd:integer; v:integer);
procedure ibclr (bd:integer);
procedure ibcmd (bd:integer; var cmd; cnt:longInt);
procedure ibcmda (bd:integer; var cmd; cnt:longInt);
procedure ibconfig (bd:integer; option:integer; v:integer);
procedure ibdiag (bd:integer; var rd; cnt:longInt);
function ibdev (boardID:integer; pad:integer; sad:integer; tmo:integer;
eot:integer; eos:integer):integer;
procedure ibdma (bd:integer; v:integer);
procedure ibeos (bd:integer; v:integer);
procedure ibeot (bd:integer; v:integer);
procedure ibevent (bd:integer; var event:integer);
function ibfind (bdname:PChar) : integer;
procedure ibgts (bd:integer; v:integer);
procedure ibist (bd:integer; v:integer);
procedure iblines (bd:integer; var lines:integer);
procedure ibln (bd:integer; pad:integer; sad:integer; var listen:integer);
procedure ibloc (bd:integer);
procedure ibonl (bd:integer; v:integer);
procedure ibpad (bd:integer; v:integer);
procedure ibpct (bd:integer);
procedure ibpoke (bd:integer; option:integer; v:integer);
procedure ibppc (bd:integer; v:integer);
procedure ibrd (bd:integer; var rd; cnt:longInt);
procedure ibrda (bd:integer; var rd; cnt:longInt);
procedure ibrdf (bd:integer; flname:PChar);
procedure ibrpp (bd:integer; var ppr:integer);
procedure ibrsc (bd:integer; v:integer);
procedure ibrsp (bd:integer; var spr:integer);
procedure ibrsv (bd:integer; v:integer);
procedure ibsad (bd:integer; v:integer);
procedure ibsic (bd:integer);
procedure ibsre (bd:integer; v:integer);
procedure ibstop (bd:integer);
procedure ibtmo (bd:integer; v:integer);
procedure ibtrg (bd:integer);
procedure ibwait (bd:integer; mask:word);
procedure ibwrt (bd:integer; const wrt; cnt:longInt);
procedure ibwrta (bd:integer; const wrt; cnt:longInt);
procedure ibwrtf (bd:integer; flname:PChar);
procedure ibwrtkey (bd:integer; const wrt; cnt:longInt);
procedure ibrdkey (bd:integer; var rd; cnt:longInt);
(************************** The 488.2 functions ****************************)
procedure SendCmds (boardID:integer; var buf; cnt:longInt);
procedure SendSetup (boardID:integer; var listeners:Addrlist);
procedure SendDataBytes (boardID:integer; var buf; cnt:longInt;
eot_mode:integer);
procedure Send (boardID:integer; listener:integer;
var databuf; datacnt:longInt;
eot_mode:integer);
procedure SendList (boardID:integer; var listeners:Addrlist;
var databuf; datacnt:longInt;
eot_mode:integer);
procedure ReceiveSetup (boardID:integer; talker:integer);
procedure RcvRespMsg (boardID:integer; var buf; cnt:longInt;
eot_mode:integer);
procedure Receive (boardID:integer; talker:integer; var buf;
cnt:longInt; eot_mode:integer);
procedure SendIFC (boardID:integer);
procedure DevClear (boardID:integer; laddr:integer);
procedure DevClearList (boardID:integer; var laddrs:Addrlist);
procedure EnableLocal (boardID:integer; var laddrs:Addrlist);
procedure EnableRemote (boardID:integer; var laddrs:Addrlist);
procedure SetRWLS (boardID:integer; var laddrs:Addrlist);
procedure SendLLO (boardID:integer);
procedure PassControl (boardID:integer; talker:integer);
procedure ReadStatusByte (boardID:integer; talker:integer;
var result:integer);
procedure Trigger (boardID:integer; laddr:integer);
procedure TriggerList (boardID:integer; var laddrs:Addrlist);
procedure PPollConfig (boardID:integer; laddr:integer; dataline:integer;
linesense:integer);
procedure PPollUnconfig (boardID:integer; var laddrs:Addrlist);
procedure PPoll (boardID:integer; var res_ptr:integer);
procedure ResetSys (boardID:integer; var laddrs:Addrlist);
procedure FindRQS (boardID:integer; var taddrs:Addrlist;
var dev_stat:integer);
procedure AllSpoll (boardID:integer; var taddrs:Addrlist;
var res:Addrlist);
procedure FindLstn (boardID:integer; var pads:Addrlist;
var result:Addrlist; limit:integer);
procedure TestSys (boardID:integer; var addrs:addrlist;
var result:addrlist);
procedure TestSRQ (boardID:integer; var result:integer);
procedure WaitSRQ (boardID:integer; var result:integer);
(***************************************************************************)
(***************************************************************************)
IMPLEMENTATION
(***************************************************************************)
(* The GPIB direct entry functions externed from GPIB.DLL *)
function DLLibask; external 'GPIB' index 55;
function DLLibbna; external 'GPIB' index 10;
function DLLibcac; external 'GPIB' index 11;
function DLLibclr; external 'GPIB' index 12;
function DLLibcmd; external 'GPIB' index 13;
function DLLibcmda; external 'GPIB' index 14;
function DLLibconfig; external 'GPIB' index 15;
function DLLibdev; external 'GPIB' index 16;
function DLLibdiag; external 'GPIB' index 17;
function DLLibdma; external 'GPIB' index 18;
function DLLibeos; external 'GPIB' index 19;
function DLLibeot; external 'GPIB' index 20;
function DLLibevent; external 'GPIB' index 21;
function DLLibfind; external 'GPIB' index 22;
function DLLibgts; external 'GPIB' index 23;
function DLLibist; external 'GPIB' index 24;
function DLLiblines; external 'GPIB' index 25;
function DLLibln; external 'GPIB' index 26;
function DLLibloc; external 'GPIB' index 27;
function DLLibonl; external 'GPIB' index 28;
function DLLibpad; external 'GPIB' index 29;
function DLLibpct; external 'GPIB' index 30;
function DLLibpoke; external 'GPIB' index 31;
function DLLibppc; external 'GPIB' index 32;
function DLLibrd; external 'GPIB' index 33;
function DLLibrda; external 'GPIB' index 34;
function DLLibrdf; external 'GPIB' index 35;
function DLLibrdkey; external 'GPIB' index 36;
function DLLibrpp; external 'GPIB' index 37;
function DLLibrsc; external 'GPIB' index 38;
function DLLibrsp; external 'GPIB' index 39;
function DLLibrsv; external 'GPIB' index 40;
function DLLibsad; external 'GPIB' index 41;
function DLLibsic; external 'GPIB' index 42;
function DLLibsre; external 'GPIB' index 43;
function DLLibstop; external 'GPIB' index 44;
function DLLibtmo; external 'GPIB' index 45;
function DLLibtrg; external 'GPIB' index 46;
function DLLibwait; external 'GPIB' index 47;
function DLLibwrt; external 'GPIB' index 48;
function DLLibwrta; external 'GPIB' index 49;
function DLLibwrtf; external 'GPIB' index 50;
function DLLibwrtkey; external 'GPIB' index 51;
procedure DLLAllSpoll; external 'GPIB' index 100;
procedure DLLDevClear; external 'GPIB' index 101;
procedure DLLDevClearList; external 'GPIB' index 102;
procedure DLLEnableLocal; external 'GPIB' index 103;
procedure DLLEnableRemote; external 'GPIB' index 104;
procedure DLLFindLstn; external 'GPIB' index 105;
procedure DLLFindRQS; external 'GPIB' index 106;
procedure DLLPassControl; external 'GPIB' index 107;
procedure DLLPPoll; external 'GPIB' index 108;
procedure DLLPPollConfig; external 'GPIB' index 109;
procedure DLLPPollUnconfig; external 'GPIB' index 110;
procedure DLLRcvRespMsg; external 'GPIB' index 111;
procedure DLLReadStatusByte; external 'GPIB' index 112;
procedure DLLReceive; external 'GPIB' index 113;
procedure DLLReceiveSetup; external 'GPIB' index 114;
procedure DLLResetSys; external 'GPIB' index 115;
procedure DLLSend; external 'GPIB' index 116;
procedure DLLSendCmds; external 'GPIB' index 117;
procedure DLLSendDataBytes; external 'GPIB' index 118;
procedure DLLSendIFC; external 'GPIB' index 119;
procedure DLLSendList; external 'GPIB' index 120;
procedure DLLSendLLO; external 'GPIB' index 121;
procedure DLLSendSetup; external 'GPIB' index 122;
procedure DLLSetRWLS; external 'GPIB' index 123;
procedure DLLTestSRQ; external 'GPIB' index 124;
procedure DLLTestSys; external 'GPIB' index 125;
procedure DLLTrigger; external 'GPIB' index 126;
procedure DLLTriggerList; external 'GPIB' index 127;
procedure DLLWaitSRQ; external 'GPIB' index 128;
(***************************************************************************)
(* The GPIB board functions *)
procedure ibask (bd:integer; option:integer; var retval:integer);
begin
rval := DLLibask (bd, option, retval, ibsta, iberr, ibcntl);
end;
procedure ibbna (bd:integer; bname:PChar);
begin
rval := DLLibbna (bd, bname, ibsta, iberr, ibcntl);
end;
procedure ibcac (bd:integer; v:integer);
begin
rval := DLLibcac (bd, v, ibsta, iberr, ibcntl);
end;
procedure ibclr (bd:integer);
begin
rval := DLLibclr (bd, ibsta, iberr, ibcntl);
end;
procedure ibcmd (bd:integer; var cmd; cnt:longInt);
begin
rval := DLLibcmd (bd, cmd, cnt, ibsta, iberr, ibcntl);
end;
procedure ibcmda (bd:integer; var cmd; cnt:longInt);
begin
rval := DLLibcmda (bd, cmd, cnt, ibsta, iberr, ibcntl);
end;
procedure ibconfig (bd:integer; option:integer; v:integer);
begin
rval := DLLibconfig (bd, option, v, ibsta, iberr, ibcntl);
end;
procedure ibdiag (bd:integer; var rd; cnt:longInt);
begin
rval := DLLibdiag (bd, rd, cnt, ibsta, iberr, ibcntl);
end;
function ibdev (boardID:integer; pad:integer; sad:integer; tmo:integer; eot:integer; eos:integer) : integer;
begin
ibdev := DLLibdev (boardID, pad, sad, tmo, eot, eos, ibsta, iberr, ibcntl);
end;
procedure ibdma (bd:integer; v:integer);
begin
rval := DLLibdma (bd, v, ibsta, iberr, ibcntl);
end;
procedure ibeos (bd:integer; v:integer);
begin
rval := DLLibeos (bd, v, ibsta, iberr, ibcntl);
end;
procedure ibeot (bd:integer; v:integer);
begin
rval := DLLibeot (bd, v, ibsta, iberr, ibcntl);
end;
procedure ibevent (bd:integer; var event:integer);
begin
rval := DLLibevent (bd, event, ibsta, iberr, ibcntl);
end;
function ibfind (bdname:PChar) : integer;
begin
ibfind := DLLibfind (bdname, ibsta, iberr, ibcntl);
end;
procedure ibgts (bd:integer; v:integer);
begin
rval := DLLibgts (bd, v, ibsta, iberr, ibcntl);
end;
procedure ibist (bd:integer; v:integer);
begin
rval := DLLibist (bd, v, ibsta, iberr, ibcntl);
end;
procedure iblines (bd:integer; var lines:integer);
begin
rval := DLLiblines (bd, lines, ibsta, iberr, ibcntl);
end;
procedure ibln (bd:integer; pad:integer; sad:integer; var listen:integer);
begin
rval := DLLibln (bd, pad, sad, listen, ibsta, iberr, ibcntl);
end;
procedure ibloc (bd:integer);
begin
rval := DLLibloc (bd, ibsta, iberr, ibcntl);
end;
procedure ibonl (bd:integer; v:integer);
begin
rval := DLLibonl (bd, v, ibsta, iberr, ibcntl);
end;
procedure ibpad (bd:integer; v:integer);
begin
rval := DLLibpad (bd, v, ibsta, iberr, ibcntl);
end;
procedure ibpct (bd:integer);
begin
rval := DLLibpct (bd, ibsta, iberr, ibcntl);
end;
procedure ibpoke (bd:integer; option:integer; v:integer);
begin
rval := DLLibpoke (bd, option, v, ibsta, iberr, ibcntl);
end;
procedure ibppc (bd:integer; v:integer);
begin
rval := DLLibppc (bd, v, ibsta, iberr, ibcntl);
end;
procedure ibrd (bd:integer; var rd; cnt:longInt);
begin
rval := DLLibrd (bd, rd, cnt, ibsta, iberr, ibcntl);
end;
procedure ibrda (bd:integer; var rd; cnt:longInt);
begin
rval := DLLibrda (bd, rd, cnt, ibsta, iberr, ibcntl);
end;
procedure ibrdf (bd:integer; flname:PChar);
begin
rval := DLLibrdf (bd, flname, ibsta, iberr, ibcntl);
end;
procedure ibrpp (bd:integer; var ppr:integer);
begin
rval := DLLibrpp (bd, ppr, ibsta, iberr, ibcntl);
end;
procedure ibrsc (bd:integer; v:integer);
begin
rval := DLLibrsc (bd, v, ibsta, iberr, ibcntl);
end;
procedure ibrsp (bd:integer; var spr:integer);
begin
rval := DLLibrsp (bd, spr, ibsta, iberr, ibcntl);
end;
procedure ibrsv (bd:integer; v:integer);
begin
rval := DLLibrsv (bd, v, ibsta, iberr, ibcntl);
end;
procedure ibsad (bd:integer; v:integer);
begin
rval := DLLibsad (bd, v, ibsta, iberr, ibcntl);
end;
procedure ibsic (bd:integer);
begin
rval := DLLibsic (bd, ibsta, iberr, ibcntl);
end;
procedure ibsre (bd:integer; v:integer);
begin
rval := DLLibsre (bd, v, ibsta, iberr, ibcntl);
end;
procedure ibstop (bd:integer);
begin
rval := DLLibstop (bd, ibsta, iberr, ibcntl);
end;
procedure ibtmo (bd:integer; v:integer);
begin
rval := DLLibtmo (bd, v, ibsta, iberr, ibcntl);
end;
procedure ibtrg (bd:integer);
begin
rval := DLLibtrg (bd, ibsta, iberr, ibcntl);
end;
procedure ibwait (bd:integer; mask:word);
begin
rval := DLLibwait (bd, mask, ibsta, iberr, ibcntl);
end;
procedure ibwrt (bd:integer; const wrt; cnt:longInt);
begin
rval := DLLibwrt (bd, wrt, cnt, ibsta, iberr, ibcntl);
end;
procedure ibwrta (bd:integer; const wrt; cnt:longInt);
begin
rval := DLLibwrta (bd, wrt, cnt, ibsta, iberr, ibcntl);
end;
procedure ibwrtf (bd:integer; flname:PChar);
begin
rval := DLLibwrtf (bd, flname, ibsta, iberr, ibcntl);
end;
procedure ibwrtkey (bd:integer; const wrt; cnt:longInt);
begin
rval := DLLibwrtkey (bd, wrt, cnt, ibsta, iberr, ibcntl);
end;
procedure ibrdkey (bd:integer; var rd; cnt:longInt);
begin
rval := DLLibrdkey (bd, rd, cnt, ibsta, iberr, ibcntl);
end;
(*********************** The 488.2 entry points ************************)
procedure AllSpoll (boardID:integer; var taddrs:Addrlist; var res:Addrlist);
begin
DLLAllSpoll (boardID, taddrs, res, ibsta, iberr, ibcntl);
end;
procedure DevClear (boardID:integer; laddr:integer);
begin
DLLDevClear (boardID, laddr, ibsta, iberr, ibcntl);
end;
procedure DevClearList (boardID:integer; var laddrs:Addrlist);
begin
DLLDevClearList (boardID, laddrs, ibsta, iberr, ibcntl);
end;
procedure EnableLocal (boardID:integer; var laddrs:Addrlist);
begin
DLLEnableLocal (boardID, laddrs, ibsta, iberr, ibcntl);
end;
procedure EnableRemote (boardID:integer; var laddrs:Addrlist);
begin
DLLEnableRemote (boardID, laddrs, ibsta, iberr, ibcntl);
end;
procedure FindLstn (boardID:integer; var pads:Addrlist; var result:Addrlist; limit:integer);
begin
DLLFindLstn (boardID, pads, result, limit, ibsta, iberr, ibcntl);
end;
procedure FindRQS (boardID:integer; var taddrs:Addrlist; var dev_stat:integer);
begin
DLLFindRQS (boardID, taddrs, dev_stat, ibsta, iberr, ibcntl);
end;
procedure PPoll (boardID:integer; var res_ptr:integer);
begin
DLLPPoll (boardID, res_ptr, ibsta, iberr, ibcntl);
end;
procedure PPollConfig (boardID:integer; laddr:integer; dataline:integer; linesense:integer);
begin
DLLPPollConfig (boardID, laddr, dataline, linesense, ibsta, iberr, ibcntl);
end;
procedure PPollUnconfig (boardID:integer; var laddrs:Addrlist);
begin
DLLPPollUnconfig (boardID, laddrs, ibsta, iberr, ibcntl);
end;
procedure PassControl (boardID:integer; talker:integer);
begin
DLLPassControl (boardID, talker, ibsta, iberr, ibcntl);
end;
procedure RcvRespMsg (boardID:integer; var buf; cnt:longInt; eot_mode:integer);
begin
DLLRcvRespMsg (boardID, buf, cnt, eot_mode, ibsta, iberr, ibcntl);
end;
procedure ReadStatusByte (boardID:integer; talker:integer; var result:integer);
begin
DLLReadStatusByte (boardID, talker, result, ibsta, iberr, ibcntl);
end;
procedure Receive (boardID:integer; talker:integer; var buf; cnt:longInt; eot_mode:integer);
begin
DLLReceive (boardID, talker, buf, cnt, eot_mode, ibsta, iberr, ibcntl);
end;
procedure ReceiveSetup (boardID:integer; talker:integer);
begin
DLLReceiveSetup (boardID, talker, ibsta, iberr, ibcntl);
end;
procedure ResetSys (boardID:integer; var laddrs:Addrlist);
begin
DLLResetSys (boardID, laddrs, ibsta, iberr, ibcntl);
end;
procedure Send (boardID:integer; listener:integer; var databuf; datacnt:longInt; eot_mode:integer);
begin
DLLSend (boardID, listener, databuf, datacnt, eot_mode, ibsta, iberr, ibcntl);
end;
procedure SendCmds (boardID:integer; var buf; cnt:longInt);
begin
DLLSendCmds (boardID, buf, cnt, ibsta, iberr, ibcntl);
end;
procedure SendDataBytes (boardID:integer; var buf; cnt:longInt; eot_mode:integer);
begin
DLLSendDataBytes (boardID, buf, cnt, eot_mode, ibsta, iberr, ibcntl);
end;
procedure SendIFC (boardID:integer);
begin
DLLSendIFC (boardID, ibsta, iberr, ibcntl);
end;
procedure SendLLO (boardID:integer);
begin
DLLSendLLO (boardID, ibsta, iberr, ibcntl);
end;
procedure SendList (boardID:integer; var listeners:Addrlist; var databuf; datacnt:longInt; eot_mode:integer);
begin
DLLSendList (boardID, listeners, databuf, datacnt, eot_mode, ibsta, iberr, ibcntl);
end;
procedure SendSetup (boardID:integer; var listeners:Addrlist);
begin
DLLSendSetup (boardID, listeners, ibsta, iberr, ibcntl);
end;
procedure SetRWLS (boardID:integer; var laddrs:Addrlist);
begin
DLLSetRWLS (boardID, laddrs, ibsta, iberr, ibcntl);
end;
procedure TestSRQ (boardID:integer; var result:integer);
begin
DLLTestSRQ (boardID, result, ibsta, iberr, ibcntl);
end;
procedure TestSys (boardID:integer; var addrs:Addrlist; var result:Addrlist);
begin
DLLTestSys (boardID, addrs, result, ibsta, iberr, ibcntl);
end;
procedure Trigger (boardID:integer; laddr:integer);
begin
DLLTrigger (boardID, laddr, ibsta, iberr, ibcntl);
end;
procedure TriggerList (boardID:integer; var laddrs:Addrlist);
begin
DLLTriggerList (boardID, laddrs, ibsta, iberr, ibcntl);
end;
procedure WaitSRQ (boardID:integer; var result:integer);
begin
DLLWaitSRQ (boardID, result, ibsta, iberr, ibcntl);
end;
(***************************************************************************)
{# No Unit Initialization Routine }
(***************************************************************************)
end.
| Detected encoding: ASCII (7 bit) | 2
|