/*
* Copyright (c) 2001 Dmitry Dicky diwil@eis.ru
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS `AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $Id: iomacros.h,v 1.36 2008/10/09 15:00:13 sb-sf Exp $
*/
#if !defined(__IOMACROS_H_)
#define __IOMACROS_H_
#if !defined(__ASSEMBLER__)
#include <sys/inttypes.h>
#ifndef BV
#define BV(x) (1 << (x))
#endif
#ifdef __cplusplus
#ifndef NAKED
#define NAKED(x) \
extern "C" void x(void); \
void x (void) __attribute__ ((naked)); \
void x (void)
#endif
#else
#ifndef NAKED
#define NAKED(x) \
void x (void) __attribute__ ((naked)); \
void x (void)
#endif
#endif
#define Critical __attribute__ ((critical))
#define CRITICAL __attribute__ ((critical))
#define critical __attribute__ ((critical))
#define noinit __attribute__ ((section(".noinit")))
#define NOINIT __attribute__ ((section(".noinit")))
#define NoInit __attribute__ ((section(".noinit")))
/* Reentrant */
#define reentrant __attribute__ ((reentrant))
#define _REENTRANT __attribute__ ((reentrant))
/* Save Prologues/epilogues */
#define saveprologue __attribute__ ((saveprologue))
#define SavePrologue __attribute__ ((saveprologue))
#define SAVEPROLOGUE __attribute__ ((saveprologue))
/* Reserve RAM defenition */
#define RESERVE_RAM(x) __attribute__ ((reserve(x)))
/*
* Status register. Cannot do
* register SR asm("r2"); cause it
* is not general register
*/
#define WRITE_SR(x) \
__asm__ __volatile__("mov %0, r2" : : "r" ((uint16_t) x))
#define READ_SR \
({ \
uint16_t __x; \
__asm__ __volatile__( \
"mov r2, %0" \
: "=r" ((uint16_t) __x) \
:); \
__x; \
})
/*
* Can do assembler assignement with r1
* but wrote next two for consistency
*/
#define WRITE_SP(x) \
__asm__ __volatile__("mov %0, r1" : : "r" ((uint16_t) x))
#define READ_SP \
({ \
uint16_t __x; \
__asm__ __volatile__( \
"mov r1, %0" \
: "=r" ((uint16_t) __x) \
:); \
__x; \
})
#define _BIS_SR(x) __asm__ __volatile__("bis %0, r2" : : "ir" ((uint16_t) x))
#define _BIC_SR(x) __asm__ __volatile__("bic %0, r2" : : "ir" ((uint16_t) x))
#define __bis_SR_register(x) __asm__ __volatile__("bis %0, r2" : : "ir" ((uint16_t) x))
#define __bic_SR_register(x) __asm__ __volatile__("bic %0, r2" : : "ir" ((uint16_t) x))
#if __GNUC__ >= 4
extern void __bis_sr_irq(int);
extern void __bic_sr_irq(int);
//extern void *__get_frame_address(void);
#define _BIS_SR_IRQ(x) __bis_sr_irq(x)
#define _BIC_SR_IRQ(x) __bic_sr_irq(x)
#define __bis_SR_register_on_exit(x) __bis_sr_irq(x)
#define __bic_SR_register_on_exit(x) __bic_sr_irq(x)
#define GET_FRAME_ADDR_F(x) __get_frame_address()
#define __EXIT_LPM(x) do {int *p = __get_frame_address(); *p = x;} while(0)
#else
/* Only use the following two macros within interrupt functions */
#define _BIS_SR_IRQ(x) \
__asm__ __volatile__ ( \
"bis %0, .L__FrameOffset_" __FUNCTION__ "(r1)" \
: : "ir" ((uint16_t) x) \
)
#define _BIC_SR_IRQ(x) \
__asm__ __volatile__ ( \
"bic %0, .L__FrameOffset_" __FUNCTION__ "(r1)" \
: : "ir" ((uint16_t) x) \
)
#define __bis_SR_register_on_exit(x) \
__asm__ __volatile__ ( \
"bis %0, .L__FrameOffset_" __FUNCTION__ "(r1)" \
: : "ir" ((uint16_t) x) \
)
#define __bic_SR_register_on_exit(x) \
__asm__ __volatile__ ( \
"bic %0, .L__FrameOffset_" __FUNCTION__ "(r1)" \
: : "ir" ((uint16_t) x) \
)
#define GET_FRAME_ADDR(name) \
({ \
uint16_t __x; \
__asm__ __volatile__( \
"mov r1, %0\n\t" \
"add #.L__FrameOffset_" #name ", %0" \
: "=r" (__x)); \
__x; \
})
#define GET_FRAME_ADDR_F(name) \
({ \
uint16_t __x; \
__asm__ __volatile__( \
"mov r1, %0\n\t" \
"add #.L__FrameOffset_" name ", %0" \
: "=r" (__x)); \
__x; \
})
#define __EXIT_LPM(x) \
do \
{ \
int *p = GET_FRAME_ADDR_F(__FUNCTION__); \
*p = x; \
} while (0)
#endif
#define sfrb_(x,x_) volatile unsigned char x asm(#x_)
#define sfrb(x,x_) sfrb_(x,x_)
#define sfrw_(x,x_) volatile unsigned int x asm(#x_)
#define sfrw(x,x_) sfrw_(x,x_)
#if 1 || defined(__MSP430X__) || defined(__MSP430X2__)
#define sfra_(x,x_) volatile unsigned long int x asm(#x_)
#define sfra(x,x_) sfra_(x,x_)
#endif
#ifdef __MSP430_TI_HEADERS__
#define const_sfrb(x,x_) const sfrb(x,x_)
#define const_sfrw(x,x_) const sfrw(x,x_)
#if 1 || defined(__MSP430X__) ||defined(__MSP430X2__)
#define const_sfra(x,x_) const sfra(x,x_)
#endif
#endif /* __MSP430_TI_HEADERS__ */
/***** USEFUL MACRO DEFINITIONS *********/
/* No operation */
#define nop() __asm__ __volatile__("nop"::)
/* IAR compatibility functions */
#define _NOP() nop()
#define __no_operation() nop()
/* Set SFR with command. Useful for bitwise operations */
#define SFR_CMD(cmd,s,v) \
({ \
typedef _ts = (s); \
__asm__ __volatile__( #cmd " %1, %0" \
: "=m" ((_ts)s) \
: "Imr" ((_ts)v)); \
})
#define WRITE_PERIPHERAL_REGISTER(addr, val) \
({ \
volatile uint8_t *__x = (uint8_t *) addr; \
__asm__ __volatile__("mov.b\t%1, %0" \
: "=m" ((uint8_t) *__x) \
: "ir" ((uint8_t) val)); \
})
#define READ_PERIPHERAL_REGISTER(addr) \
({ \
volatile uint8_t *__x = (uint8_t *) addr; \
(uint8_t)*__x; \
})
#define AND_LOW(v, i) \
({ \
int __t; \
__asm__ __volatile__ ( \
"mov %A1, %0 \n\t" \
"and %A2, %0" \
: "=r" (__t) \
: "mr" (v), \
"ir" (i) \
); \
__t; \
})
#define AND_HI(v, i) \
({ \
int __t; \
__asm__ __volatile__ ( \
"mov %B1, %0 \n\t" \
"and %B2, %0" \
: "=r" (__t) \
: "mr" (v), \
"ir" (i) \
); \
__t; \
})
#define AND_LOW_V(v, i) \
({ \
int __t; \
__asm__ __volatile__ ( \
"mov %A1, %0 \n\t" \
"and %A2, %0" \
: "=r" (__t) \
: "m" (v), \
"ir" (i) \
); \
__t; \
})
#define AND_HI_V(v, i) \
({ \
int __t; \
__asm__ __volatile__ ( \
"mov %B1, %0 \n\t" \
"and %B2, %0" \
: "=r" (__t) \
: "m" (v), \
"ir" (i) \
); \
__t; \
})
#define MARK_VOLATILE __asm__ __volatile__("; volatile")
#endif /* not __ASSEMBLER__ */
/*
* Defines for assembler.
* Hope there is a better way to do this.
*/
#if defined(__ASSEMBLER__)
#define sfrb(x,x_) x=x_
#define sfrw(x,x_) x=x_
#if 1 || defined(__MSP430X__) || defined(__MSP430X2__)
#define sfra(x,x_) x=x_
#endif
#ifdef __MSP430_TI_HEADERS__
#define const_sfrb(x,x_) sfrb(x,x_)
#define const_sfrw(x,x_) sfrw(x,x_)
#if 1 || defined(__MSP430X__) || defined(__MSP430X2__)
#define const_sfra(x,x_) sfra(x,x_)
#endif /* MSP430X or MSP430X2 */
#endif /* __MSP430_TI_HEADERS__ */
#endif
#endif /* __IOMACROS_H_ */
| Vorgefundene Kodierung: ASCII (7 bit) | 2
|