(unsortiert) | Dateiname | Erw | Zuletzt geändert | Größe | Komprimiert | Beschreibung |
Ansehen | Treppe16x6 | asm | 2024-02-17 12:35:14 | 173.568 | 29.915 | 17,2 | Assembler-Quelltext (meist 80x86) oder SolidEdge: Teile-Montage
|
| Treppe16x6 | cfg | 2024-02-17 12:35:14 | 6.656 | 553 | 8,3 | CFG-Datei
|
Ansehen | Treppe16 | asm | 2024-02-17 12:30:36 | 206.848 | 38.719 | 18,7 | Assembler-Quelltext (meist 80x86) oder SolidEdge: Teile-Montage
|
Ansehen | Treppe4 | asm | 2024-02-17 12:28:18 | 155.648 | 31.010 | 19,9 | Assembler-Quelltext (meist 80x86) oder SolidEdge: Teile-Montage
|
| Treppe16 | cfg | 2024-02-17 12:30:36 | 4.096 | 373 | 9,1 | CFG-Datei
|
| Quadratrohr 80x5000x3 | par | 2024-02-14 23:05:00 | 137.216 | 54.650 | 39,8 | SolidEdge: Volumenmodell
|
| Treppe4 | cfg | 2024-02-17 12:28:18 | 3.584 | 289 | 8,1 | CFG-Datei
|
| Innenwange | psm | 2024-02-17 11:29:50 | 235.008 | 83.231 | 35,4 | SolidEdge: Blechteil
|
| Eckblech | psm | 2024-02-14 22:36:10 | 107.008 | 38.954 | 36,4 | SolidEdge: Blechteil
|
| 796x280x2 | psm | 2024-02-14 22:28:14 | 170.496 | 58.181 | 34,1 | SolidEdge: Blechteil
|
| Außenwange | psm | 2024-02-17 11:40:56 | 333.312 | 112.404 | 33,7 | SolidEdge: Blechteil
|
| 796x178x2 | psm | 2024-02-14 20:40:50 | 114.688 | 37.105 | 32,4 | SolidEdge: Blechteil
|
| Turmskizze | par | 2024-02-13 22:16:32 | 100.864 | 32.927 | 32,6 | SolidEdge: Volumenmodell
|
Ansehen | Treppe16x6.asm | istl | 2024-02-17 12:36:22 | 301.625 | 199.196 | 66,0 | 3D-Modell: Dreiecksliste (Int16)
|
| Treppe4 | psm | 2024-02-17 12:12:48 | 553.984 | 205.606 | 37,1 | SolidEdge: Blechteil
|
| 395x120x2 | psm | 2024-02-17 12:09:20 | 119.808 | 44.713 | 37,3 | SolidEdge: Blechteil
|
Ansehen | Treppe4.asm | istl | 2024-02-17 12:36:14 | 11.756 | 8.699 | 74,0 | 3D-Modell: Dreiecksliste (Int16)
|
| 17 Dateien | | Σ 2.736.165 | Byte | % | |